Observations about the universe, life, Lausanne and me

Thursday, April 12, 2007

Hollow Cathode Plasma


As promised yesterday, another photo of an argon-plasma. You can see the new electrode above, with different-sized holes in it. Each hole is a hollow cathode, and lights up under the right conditions, producing a much denser plasma than a flat electrode would. I also wanted to show you what happens if I increase neutral pressure and power, but then my flowmeter died - no more argon until I change it.

4 comments:

  1. Dear Boris,

    I am a graduate student who is interested in using hollow cathode construction for CVD process. I would appreciate if you could let me know how you designed one.

    ReplyDelete
  2. Hi som, basically all you need to do is have a hole that is larger than twice the sheath-width of your plasma. You have quite a bit of leeway, but plasma chemistry and electrode material will influence that. Lieberman (Principles of Plasma Discharges) has a short chapter on DC hollow cathodes. If you are interested in RF hollow cathodes I would suggest this paper by L.Bárdoš https://doi.org/10.1016/S0257-8972(96)03056-3
    If you have easy access to your reactor, just stick some plates with different sized holes in and play with pressure and RF power. Best of luck!

    ReplyDelete
  3. This comment has been removed by the author.

    ReplyDelete
  4. This comment has been removed by the author.

    ReplyDelete